The Series 55 Bearing Round Sheet Metal Punch is a precision tool designed to make circular cuts in sheet metal with great efficiency and durability.
This model of perforator is optimized to work on steel sheets up to 2 mm thick and on stainless steel sheets up to 1.5 mm, although it is important to consider the specifications of the material to be worked on due to the variety that exists in steels and steels. stainless.
Equipped with very high resistance screws, with a capacity of 140 kg/mm², the perforator guarantees superior performance in the most demanding applications.
In addition, it incorporates a bearing that increases the performance of the perforator by 200%, allowing the user to require only half the force to make the cut, which is especially useful in the case of large diameter holes.
The ground edge of the perforator ensures a clean and precise cut, extending the life of the tool and improving its performance with each use.

Recommendations for Use:
Be sure to lubricate the sheet metal well before starting drilling to make cutting easier and reduce tool wear.
Check the thickness and type of material to be drilled to ensure it is within the capabilities of the driller.
Use the 56 series if you are in doubt about the strength of the steel or if the sheet metal is especially hard.
Maintain constant and even pressure during cutting to obtain a clean and precise hole.
Always wear appropriate personal protective equipment, such as gloves and safety glasses, when using the drill.

Maintenance Recommendations:
Clean the tool after each use to remove metal debris and oil, which will help extend its life.
Periodically lubricate screws and bearings to ensure smooth operation and prevent premature wear.
Store the drill in a dry, safe place, protected from moisture and dust, to prevent corrosion and keep it in optimal condition.